Natural Rattan Cane Chair Repair Kit

DESCRIPTION Easy DIY Option to repair Cesca, Bentwood or any chair that uses pre-woven rattan cane sheets. Included is a 45 x 50cm sheet of cane webbing, and 2m length of round spline to fasten into channel. ❌ Not suitable for chairs that are woven in-frame. If your chair has small holes around the seat opening, with strands of cane woven in and out, this product might not be suitable. These holes can often be seen from the underside of chair. CANE WEBBING Material : 100% natural rattan Size : 45 x 50cm Weave Pattern : Open weave Hexagonal Pattern Hole Size: 7mm or 9mm Colour: Natural Brown Panel thickness: Approximately 1.5 to 2.0mm Indoor use only ROUND SPLINE Material : 100% natural rattan Diameter : 4, 5 or 6mm Length : 2m Colour: Natural Light Brown or Stained Dark Brown BEFORE YOU ORDER ✅Please measure channel to channel distance to ensure 45 x 50cm sheet is suitable (refer to photos for more information) ✅Please remove a small section of existing round spline from channel, clean out any debris before measuring width of channel. Ordered round spline should be at least 1mm smaller than width of channel (refer to photos for more information) DIY TIPS Preparation is key. Below are some handy tips 💡 💡To remove stubborn old glue from the channel, try using a heat gun or hair dryer to soften it up before scraping. 💡If you find that the old cane webbing was fastened into channel using staples, remove as many as you possibly can, and punch the remaining as flat as possible. Sold on Direct Factory Furniture Australia (https://directfactoryfurniture.com.au/products/natural-rattan-cane-chair-repair-kit). The price shown is the retail price on that storefront on 2026-10-20, not a GreenB2B quote or a wholesale price.