200W Monocrystalline Solar Panel PV Module for Home & Commercial Rooftop

At 28.08 V open-circuit and 23.4 V at maximum power, this module is optimised for 24 V battery banks while still working with higher-voltage MPPT inputs. It suits systems that have outgrown 12 V and need to keep cable sizes manageable. Where it fits best Small 24 V off-grid systems Pump and refrigeration loads on a solar home system Expanding an array where 12 V cable losses have become a problem Questions buyers ask Should I move from 12 V to 24 V for this panel? If you are building fresh and expect to grow, 24 V is usually the better platform: half the current, cheaper cable, and most inverters in this range support it. What controller rating suits a pair of these? Two in parallel give roughly 18 A, so a 30 A MPPT controller leaves sensible headroom. Technical specifications Maximum Power (Pmax) 200 W Open Circuit Voltage (Voc) 28.08 V Short Circuit Current (Isc) 9.06 A Voltage at Pmax (Vmp) 23.4 V Current at Pmax (Imp) 8.55 A Module Efficiency 19.87 % Power Tolerance 0, +4.99W Maximum System Voltage 700 V DC Max Series Fuse Rating 15 A Module Type 210M200 Solar Cells Mono crystalline 210*105mm (3*13Pcs) External Dimensions 1480*680*30mm Weight 10.6 kg Front Glass 3.2 mm tempered glass Frame Aluminum Junction Box IP67 Output Cables 70CM 2.5mm² Cable Connector MC4 Compatible Mechanical Load Front Side Max. 5400Pa, Rear Side Max. 2400Pa Pmax Temperature Coefficient -0.350%/°C Voc Temperature Coefficient -0.270%/°C Isc Temperature Coefficient +0.048%/°C Package Dimensions 1490 Sold on IPV ESSA (https://ipvsolar.com/products/200w-1480x680x30mm). The price shown is the retail price on that storefront on 2026-10-21, not a GreenB2B quote or a wholesale price.